L2D use X3G format instead of G-Code
You have to install the Cura pluginX3G writerfrom marketplace and restart Cura. Save as X3G when exporting printing file.
225.0 mm145.0 mm150.0 mmRectangulartruefalsefalseMakerBot-20 mm-10 mm10 mm10 mm200 mm1true; - start of START GCODE -
M73 P0 (enable build progress)
M92 X88.8 Y88.8 Z400 E101 ; sets steps per mm for Rep2
G90 (set positioning to absolute)
(**** begin homing ****)
G162 X Y F4000 (home XY axes maximum)
G161 Z F3500 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G92 X147 Y66 Z5
G1 X105 Y-60 Z10 F4000.0 (move to waiting position)
G130 X0 Y0 A0 B0 (Set Stepper motor Vref to lower value while heating)
G130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)
G0 X105 Y-60 (Position Nozzle)
G0 Z0.6 (Position Height)
; - start of END GCODE -
G92 Z0
G1 Z10 F400
M18
M104 S0 T0
M73 P100 (end build progress)
G162 X Y F3000
M18